MORE INFORMATION     CUSTOM ORDERS     SHIPPING & RETURNS
 

My holsters are made from premium vegetable-tanned tooling leather, usually about 1/8" thick. They are entirely hand-crafted from natural materials, so some variation is to be expected. Unless otherwise specified, the bottom of the holster will be partially open to make removal of your PV easier, by pushing it up from the bottom. Due to this open bottom design, smaller mods may fall out; please be sure to order the correct size for your mod.

Please note that these items are not intended for use with "wraps" - you should remove any 3rd party coverings before attempting to place your device into a sleeve or holster.

All products on this page are in-stock items and will typically ship within two business days. Please note that there is only one of each item available, unless otherwise noted, and these completed pieces cannot be further customized.

New items are added almost every week, typically on Friday afternoons.

Payments

 

Snap-On Swivel Belt Clip (ACC-01) - $7.95
Handy snap-on leather strap with attached swivel clip to cary your flexi-sleeve on your belt, backpack, purse, or whatever else you might want to clip it to. Also works great for keyrings, flashlights or any other small object that has a loop to sllde onto the clip.

Fits on most belts up to 1¾ inches wide.

Black & Nickel, 3/4" Wide 6
Black & Brass, 3/4" Wide 4
Brown & Brass, 3/4" Wide 5
 

Matching Snap-On Belt Clip (ACC01-TWIST) - $9.95
Handy snap-on leather strap with attached swivel clip to cary your flexi-sleeve on your belt, backpack, purse, or whatever else you might want to clip it to.

This strap is embossed and colored to match the licorice twist themed flexi-sleeves, available below.

Fits on most belts up to 1¾ inches wide.

 

Washburn Holster for ProVari (Standard)/ProVari Mini (Extended) (SG-V455) - $39.95
The sleek, lightweight Washburn holster is a bit dressier than my standard belt holsters and hangs from the belt so that your mod rests on your hip, rather than your against your waist. Fits snugly, to keep your mod in place, and features a combination of hand-stitching and riveted construction.

This holster features a wide, fixed belt loop that will accommodate most belts up to 2 1/2 inches wide. In black with black stitching.

3 available.

 

Open-Top Holster for ProVari (Extended)/Various Mods (SG-V451) - $39.95
Lightweight, hand-stitched leather open-top holster designed to fit fairly snugly in order to keep your mod securely in place, in black with black stitching. Features a 1/2 inch wide metal spring clip so that you can attach it to your belt or pants.

This holster will comfortably fit the full-size ProVari with extended cap (shown), the VAMO in tall configuration (18650/Dual 18350 - 22mm x 135mm), the GLV-2, and the Buzz/Buzz Pro.

5 available.

ProVape Electronic Cigarettes
 

Mod Sleeve for ProVari (Extended Cap) - $34.95
Snug fitting, hand-stitched leather mod sleeve to protect and decorate your ProVari, in your choice of black with black stitching, or mahogany with tan stitching and black edge detailing.

These rugged sleeves feature a cutout, on the reverse side, so that you can view theProVari LCD display without removing the device from the sleeve.

Style & Color   Stock  
Black Sleeve   4  
Mahogany Sleeve   0  
 

Flexi-Sleeve for ProVari (Extended Cap) - $39.95
Snug fitting, hand-stitched leather flexi-sleeve to protect and decorate your ProVari, in your choice of black with black stitching and nickel hardware, or mahogany with tan stitching, black edge detailing, and brass hardware.

These rugged flexi-sleeves feature a cutout, on the back beneath the lanyard ring, so that you can view theProVari LCD display without removing the device from the sleeve.

Includes a 36 inch (total length) round nylon lanyard with J-clip so that you can wear the sleeve as a lanyard but you can also use a carabiner or one of my handy snap-on clips, above, to attach it to your belt, pants, bag, or whatever!

Style & Color   Stock  
Black Flexi-Sleeve   3  
Mahogany Flexi-Sleeve   3  
 

Washburn Holster for ProVari (Extended Cap) (SG-V454) - $39.95
The sleek, lightweight Washburn holster is a bit dressier than my standard belt holsters and hangs from the belt so that your mod rests on your hip, rather than your against your waist.

Fits snugly, to keep your mod in place, and features a combination of hand-stitching and riveted construction. This holster features a wide, fixed belt loop that will accommodate most belts up to 2 1/2 inches wide. In black with black stitching.

1 available.

 

Flexi-Sleeve for ProVari (Extended Cap) (E428) - $39.95
Snug fitting, hand-stitched leather flexi-sleeve to protect and decorate your ProVari, in acorn brown with brown stitching. Features a cutout, beneath the lanyard ring, so that you can view the LCD display without removing the device from the sleeve.

Includes a 36 inch (total length) round nylon lanyard with J-clip so that you can wear it as a lanyard but you can also use a carabiner or one of my handy snap-on clips, above, to attach it to a belt, belt loop, bag, or whatever!

 

Embossed Flexi-Sleeve for ProVari (Extended Cap) (E424) - $44.95
Relaxed fit, hand-stitched leather flexi-sleeve to protect and decorate your ProVari, embossed with a licorice twist design, in black with black stitching.

Features a cutout, on the back beneath the lanyard ring, so that you can view the LCD display without removing the device from the sleeve and includes a 36 inch (total length) nylon lanyard with J-clip so that you can wear it as a lanyard.

(See accessories section, at top of page, for a matching belt clip for this piece.)

2 available

 

Flexi-Sleeve for ProVari (Extended Cap) (E416) - $39.95
Snug fitting, hand-stitched leather flexi-sleeve to protect and decorate your ProVari, in bordeaux with light brown stitching and a glossy finish. Features a cutout, beneath the lanyard ring, so that you can view the LCD display without removing the device from the sleeve.

Includes a 36 inch (total length) round nylon lanyard with J-clip so that you can wear it as a lanyard but you can also use a carabiner or one of my handy snap-on clips, above, to attach it to a belt, belt loop, bag, or whatever!

 

Along Came A Spider Flexi-Sleeve for ProVari (Extended Cap) (E412) - $49.95
Snug fitting, hand-stitched leather flexi-sleeve to protect and decorate your ProVari, embossed with a spider and web theme, in black with silver highlights, black stitching, and a glossy finish.

Features a cutout, on the back beneath the lanyard ring, so that you can view the LCD display without removing the device from the sleeve and includes a 36 inch (total length) nylon lanyard with J-clip so that you can wear it as a lanyard.

(See accessories section, at top of page, for a matching belt clip for this piece.)

 

Embossed Mod Sleeve for ProVari (Extended Cap) (E406) - $34.95
Snug fitting, hand-stitched leather mod sleeve to protect and decorate your ProVari, embossed with a chainlink pattern in evening blue and silver with royal blue stitching. Features a cutout, on the reverse side, so that you can view the LCD display without removing the device from the sleeve.

 

Daisies Inviolet Flexi-Sleeve for ProVari (Extended Cap) (SG-X376) - $54.95 $44.95
Snug fitting flexi-sleeve to protect and decorate your ProVari, in violet with white stitching, features stamped flowers hand painted in light pink with yellow centers, alternating with perforations that allow the color of your mod to show through, with a glossy finish. Includes a cutout so that you can view the LCD display without removing the device from the sleeve.

Includes a 36 inch (total length) round nylon lanyard with J-clip so that you can wear it as a lanyard but you can also use a carabiner or one of my handy snap-on clips (above) to attach it to a belt, belt loop, bag, or whatever!

 

Dragonhide Sleeve for ProVari (Extended Cap) (SG-X374) - $39.95 $34.95
Snug fitting, lightweight Dragonhide mod sleeve to protect and decorate your ProVari, in red dragonhide (metallic red and gold) with red stitching and glossy finish. Features a cutout so that you can view the LCD display without removing the device from the sleeve.

 

Mod Sleeve for ProVari (Standard Cap) - $34.95
Snug fitting, hand-stitched leather mod sleeve to protect and decorate your ProVari, in your choice of black with black stitching, or mahogany with tan stitching and black edge detailing.

These rugged sleeves feature a cutout, on the reverse side, so that you can view theProVari LCD display without removing the device from the sleeve.

Style & Color   Stock  
Black Sleeve   3  
Mahogany Sleeve   3  
 

Flexi-Sleeve for ProVari (Standard Cap) - $39.95
Snug fitting, hand-stitched leather flexi-sleeve to protect and decorate your ProVari, in your choice of black with black stitching and nickel hardware, or mahogany with tan stitching, black edge detailing, and brass hardware.

These rugged flexi-sleeves feature a cutout, on the back beneath the lanyard ring, so that you can view theProVari LCD display without removing the device from the sleeve.

Includes a 36 inch (total length) round nylon lanyard with J-clip so that you can wear the sleeve as a lanyard but you can also use a carabiner or one of my handy snap-on clips, above, to attach it to your belt, pants, bag, or whatever!

Style & Color   Stock  
Black Flexi-Sleeve   4  
Mahogany Flexi-Sleeve   4  
 

Embossed Flexi-Sleeve for ProVari (Standard Cap) (E425) - $44.95
Relaxed fit, hand-stitched leather flexi-sleeve to protect and decorate your ProVari, embossed with a licorice twist design, in black with black stitching.

Features a cutout, on the back beneath the lanyard ring, so that you can view the LCD display without removing the device from the sleeve and includes a 36 inch (total length) nylon lanyard with J-clip so that you can wear it as a lanyard.

(See accessories section, at top of page, for a matching belt clip for this piece.)

 

Embossed Sleeve for ProVari (Standard Cap) (E421) - $39.95
Relaxed fit, hand-stitched leather mod sleeve to protect and decorate your ProVari, with embossed checkerboard pattern in mahogany with tan stitching and black edge detailing. Features a cutout, on the reverse side, so that you can view the LCD display without removing the device from the sleeve.

 

Flexi-Sleeve for ProVari (Standard Cap) (E417) - $39.95
Snug fitting, hand-stitched leather flexi-sleeve to protect and decorate your ProVari, in bordeaux with light brown stitching and a glossy finish. Features a cutout, beneath the lanyard ring, so that you can view the LCD display without removing the device from the sleeve.

Includes a 36 inch (total length) round nylon lanyard with J-clip so that you can wear it as a lanyard but you can also use a carabiner or one of my handy snap-on clips, above, to attach it to a belt, belt loop, bag, or whatever!

 

Stamped Flexi-Sleeve for ProVari (Standard Cap) (SG-E403) - $49.95
Snug fitting, hand-stitched leather flexi-sleeve to protect and decorate your ProVari, with stamped and hand-painted pink roses, in black with black stitching. Features a cutout, beneath the lanyard ring, so that you can view the LCD display without removing the device from the sleeve.

Includes a 36 inch (total length) round nylon lanyard with J-clip so that you can wear it as a lanyard but you can also use a carabiner or one of my handy snap-on clips, above, to attach it to a belt, belt loop, bag, or whatever!

 

Mod Sleeve for ProVari (Standard Cap) (E430) - $34.95
Snug fitting, hand-stitched leather mod sleeve to protect and decorate your ProVari, in fudge brown with brown stitching, a stamped sunburst design around the button hole, and black edge detailing. Features a cutout, on the reverse side, so that you can view the LCD display without removing the device from the sleeve.

 

Embossed Mod Sleeve for ProVari Mini (Extended Cap) (SG-V461) - $44.95 $34.95
Snug fitting, hand-stitched leather mod sleeve to protect and decorate your ProVari, with embossed Celtic cross, in antiqued tan with brown stitching and a glossy finish. Features a cutout, on the reverse side, so that you can view the LCD display without removing the device from the sleeve.

 

Embossed Flexi-Sleeve for ProVari (Standard Cap) (SG-V467) - $44.95 $34.95
Snug fitting, hand-stitched leather flexi-sleeve to protect and decorate your ProVari, with embossed "wicker" weave pattern in acorn brown with a solid brass D-ring and brown stitching. Features a cutout, on the reverse side, so that you can view the LCD display without removing the device from the sleeve.

Includes a 36 inch (total length) round nylon lanyard with J-clip so that you can wear it as a lanyard but you can also use a carabiner or one of my handy snap-on clips (above) to attach it to a belt, belt loop, bag, or whatever!

 

Embossed Mod Sleeve for ProVari (Standard Cap) (SG-V420) - $44.95 $39.95
Snug fitting, hand-stitched leather sleeve to protect and decorate your ProVari, with embossed Celtic shamrock design in blarney green with olive stitching and a glossy finish. Features a cutout, on the back, so that you can view the LCD display without removing the device from the sleeve.

ProVape Electronic Cigarettes
 

Mod Sleeve for ProVari Mini (Extended Cap) - $34.95
Snug fitting, hand-stitched leather mod sleeve to protect and decorate your ProVari, in your choice of black with black stitching, or mahogany with tan stitching and black edge detailing.

These rugged sleeves feature a cutout, on the reverse side, so that you can view theProVari LCD display without removing the device from the sleeve.

Style & Color   Stock  
Black Sleeve   3  
Mahogany Sleeve   4  
 

Flexi-Sleeve for ProVari Mini (Extended Cap) - $39.95
Snug fitting, hand-stitched leather flexi-sleeve to protect and decorate your ProVari, in your choice of black with black stitching and nickel hardware, or mahogany with tan stitching, black edge detailing, and brass hardware.

These rugged flexi-sleeves feature a cutout, on the back beneath the lanyard ring, so that you can view theProVari LCD display without removing the device from the sleeve.

Includes a 36 inch (total length) round nylon lanyard with J-clip so that you can wear the sleeve as a lanyard but you can also use a carabiner or one of my handy snap-on clips, above, to attach it to your belt, pants, bag, or whatever!

Style & Color   Stock  
Black Flexi-Sleeve   4  
Mahogany Flexi-Sleeve   2  
 

Embossed Flexi-Sleeve for ProVari Mini (Extended Cap) (E426) - $44.95
Relaxed fit, hand-stitched leather flexi-sleeve to protect and decorate your ProVari, embossed with a licorice twist design, in black with black stitching.

Features a cutout, on the back beneath the lanyard ring, so that you can view the LCD display without removing the device from the sleeve and includes a 36 inch (total length) nylon lanyard with J-clip so that you can wear it as a lanyard.

(See accessories section, at top of page, for a matching belt clip for this piece.)

 

Embossed Sleeve for ProVari Mini (Extended Cap) (E422) - $39.95
Relaxed fit, hand-stitched leather mod sleeve to protect and decorate your ProVari, with embossed checkerboard pattern in mahogany with tan stitching and black edge detailing. Features a cutout, on the reverse side, so that you can view the LCD display without removing the device from the sleeve.

 

Flexi-Sleeve for ProVari Mini (Extended Cap) (E418) - $39.95
Snug fitting, hand-stitched leather flexi-sleeve to protect and decorate your ProVari, in bordeaux with light brown stitching and a glossy finish. Features a cutout, beneath the lanyard ring, so that you can view the LCD display without removing the device from the sleeve.

Includes a 36 inch (total length) round nylon lanyard with J-clip so that you can wear it as a lanyard but you can also use a carabiner or one of my handy snap-on clips, above, to attach it to a belt, belt loop, bag, or whatever!

 

Along Came A Spider Flexi-Sleeve for ProVari Mini (Extended Cap) (E414) - $49.95
Snug fitting, hand-stitched leather flexi-sleeve to protect and decorate your ProVari, embossed with a spider and web theme, in black with silver highlights, black stitching, and a glossy finish.

Features a cutout, on the back beneath the lanyard ring, so that you can view the LCD display without removing the device from the sleeve and includes a 36 inch (total length) nylon lanyard with J-clip so that you can wear it as a lanyard.

(See accessories section, at top of page, for a matching belt clip for this piece.)

 

Embossed Mod Sleeve for ProVari Mini (Extended Cap) (E408) - $34.95
Snug fitting, hand-stitched leather mod sleeve to protect and decorate your ProVari, embossed with a chainlink pattern in evening blue and silver with royal blue stitching. Features a cutout, on the reverse side, so that you can view the LCD display without removing the device from the sleeve.

 

Embossed Flexi-Sleeve for ProVari Mini (Extended Cap) (SG-P417) - $49.95 $39.95
Snug fitting, hand-stitched leather flexi-sleeve to protect and decorate your ProVari, with embossed "dots" pattern in custom "vintage appliance green" color with olive stitching and a glossy finish. Features a cutout, beneath the lanyard ring, so that you can view the LCD display without removing the device from the sleeve.

Includes a 36 inch (total length) round nylon lanyard with J-clip so that you can wear it as a lanyard but you can also use a carabiner or one of my handy snap-on clips (above) to attach it to a belt, belt loop, bag, or whatever!

 

Embossed Flexi-Sleeve for ProVari Mini (Extended Cap) (SG-V475) - $49.95 $39.95
Snug fitting, hand-stitched leather flexi-sleeve to protect and decorate your ProVari, with embossed weave pattern in bamboo green with olive stitching. Features a cutout, beneath the lanyard ring, so that you can view the LCD display without removing the device from the sleeve.

Includes a 36 inch (total length) round nylon lanyard with J-clip so that you can wear it as a lanyard but you can also use a carabiner or one of my handy snap-on clips (above) to attach it to a belt, belt loop, bag, or whatever!

 

Morocco Flexi-Sleeve for ProVari Mini (Extended Cap) (SG-V427) - $69.95 $54.95
Snug fitting, hand-stitched leather flexi-sleeve to protect and decorate your ProVari, with hand tooled Morocco design in blarney green with olive stitching, a solid brass D-ring, and a glossy finish. Features a cutout, beneath the lanyard ring, so that you can view the LCD display without removing the device from the sleeve.

Includes a 36 inch (total length) round nylon lanyard with J-clip so that you can wear it as a lanyard but you can also use a carabiner or one of my handy snap-on clips (above) to attach it to a belt, belt loop, bag, or whatever!

 

Mod Sleeve for ProVari Mini (Standard Cap) - $34.95
Snug fitting, hand-stitched leather mod sleeve to protect and decorate your ProVari, in your choice of black with black stitching, or mahogany with tan stitching and black edge detailing.

These rugged sleeves feature a cutout, on the reverse side, so that you can view theProVari LCD display without removing the device from the sleeve.

Style & Color   Stock  
Black Sleeve   5  
Mahogany Sleeve   0  
 

Flexi-Sleeve for ProVari Mini (Standard Cap) - $39.95
Snug fitting, hand-stitched leather flexi-sleeve to protect and decorate your ProVari, in your choice of black with black stitching and nickel hardware, or mahogany with tan stitching, black edge detailing, and brass hardware.

These rugged flexi-sleeves feature a cutout, on the back beneath the lanyard ring, so that you can view theProVari LCD display without removing the device from the sleeve.

Includes a 36 inch (total length) round nylon lanyard with J-clip so that you can wear the sleeve as a lanyard but you can also use a carabiner or one of my handy snap-on clips, above, to attach it to your belt, pants, bag, or whatever!

Style & Color   Stock  
Black Flexi-Sleeve   4  
Mahogany Flexi-Sleeve   3  
 

Embossed Flexi-Sleeve for ProVari Mini (Standard Cap) (E427) - $44.95
Snug fitting, hand-stitched leather flexi-sleeve to protect and decorate your ProVari, embossed with a licorice twist design, in black with black stitching.

Features a cutout, on the back beneath the lanyard ring, so that you can view the LCD display without removing the device from the sleeve and includes a 36 inch (total length) nylon lanyard with J-clip so that you can wear it as a lanyard.

(See accessories section, at top of page, for a matching belt clip for this piece.)

 

Embossed Sleeve for ProVari Mini (Standard Cap) (E423) - $39.95
Snug fitting, hand-stitched leather mod sleeve to protect and decorate your ProVari, with embossed checkerboard pattern in mahogany with tan stitching and black edge detailing. Features a cutout, on the reverse side, so that you can view the LCD display without removing the device from the sleeve.

 

Flexi-Sleeve for ProVari Mini (Standard Cap) (E419) - $39.95
Snug fitting, hand-stitched leather flexi-sleeve to protect and decorate your ProVari, in bordeaux with light brown stitching and a glossy finish. Features a cutout, beneath the lanyard ring, so that you can view the LCD display without removing the device from the sleeve.

Includes a 36 inch (total length) round nylon lanyard with J-clip so that you can wear it as a lanyard but you can also use a carabiner or one of my handy snap-on clips, above, to attach it to a belt, belt loop, bag, or whatever!

 

Along Came A Spider Flexi-Sleeve for ProVari Mini (Standard Cap) (E415) - $49.95
Snug fitting, hand-stitched leather flexi-sleeve to protect and decorate your ProVari, embossed with a spider and web theme, in black with silver highlights, black stitching, and a glossy finish.

Features a cutout, on the back beneath the lanyard ring, so that you can view the LCD display without removing the device from the sleeve and includes a 36 inch (total length) nylon lanyard with J-clip so that you can wear it as a lanyard.

(See accessories section, at top of page, for a matching belt clip for this piece.)

 

Daisies Inviolet Flexi-Sleeve for ProVari Mini (Standard Cap) (SG-V466) - $54.95 $49.95
Snug fitting, hand-stitched leather flexi-sleeve to protect and decorate your ProVari, with alternating stamped and punched flowers, handpainted in light pink with yellow centers, in deep violet with lilac stitching and a glossy finish. Features a cutout, on the reverse side, so that you can view the LCD display without removing the device from the sleeve.

Includes a 36 inch (total length) round nylon lanyard with J-clip so that you can wear it as a lanyard but you can also use a carabiner or one of my handy snap-on clips (above) to attach it to a belt, belt loop, bag, or whatever!

 

Embossed Mod Sleeve for ProVari Mini (Standard Cap) (SG-V464) - $44.95
Snug fitting, hand-stitched leather mod sleeve to protect and decorate your ProVari, with debossed chainlink pattern in evening blue and metallic silver highlighting, royal blue stitching, and a glossy finish. Features a cutout, on the reverse side, so that you can view the LCD display without removing the device from the sleeve.

 

Embossed Mod Sleeve for ProVari Mini (Standard Cap) (SG-V468) - $44.95 $34.95
Relaxed fit, hand-stitched leather mod sleeve to protect and decorate your ProVari, with embossed "wicker" weave pattern in acorn brown with brown stitching. Features a cutout, on the reverse side, so that you can view the LCD display without removing the device from the sleeve.

 

Morocco Flexi-Sleeve for ProVari Mini (Standard Cap) (SG-V432) - $69.95 $54.95
Snug fitting, hand-stitched leather flexi-sleeve to protect and decorate your ProVari, with hand tooled Morocco design in blarney green with olive stitching and a glossy finish. Features a cutout, beneath the lanyard ring, so that you can view the LCD display without removing the device from the sleeve.

Includes a 36 inch (total length) round nylon lanyard with J-clip so that you can wear it as a lanyard but you can also use a carabiner or one of my handy snap-on clips (above) to attach it to a belt, belt loop, bag, or whatever!

 

Embossed Mod Sleeve for ProVari Mini (Standard Cap) (SG-V430) - $44.95 $39.95
Snug fitting, hand-stitched leather sleeve to protect and decorate your ProVari, with embossed Celtic shamrock design in blarney green with olive stitching and a glossy finish. Features a cutout, on the back, so that you can view the LCD display without removing the device from the sleeve.

 

Deluxe Belt Holster for Billet Box - $59.95 $49.95
Deluxe heavy-duty, hand-stitched leather holster, in your choice of black with black stitching or mahogany with brown stitching and black edge detailing.

This rugged holster features a snap-close safety strap as well as a 7/8 inch wide metal spring clip so that you can attach it to your belt or pants.

Style & Color   Stock  
Black Holster   1  
Mahogany Holster   1  
 

Deluxe Belt Holster for Billet Box (SG-P401) - $49.95 $39.95
Deluxe heavy-duty, hand-stitched leather holster, in black with black stitching. Features a 1.25 inch wide fixed leather belt loop which will fit on most belts up to three inches wide.

 

Configuarable Belt Holster for iTaste 134 - $49.95
Heavy-duty leather holster, designed specially for the Innokin iTaste 134, includes a holster body, two upper attachments (one with a wide leather belt loop and one with a 7/8 inch metal spring clip), an optional snap-close safety strap, and an extra set of screw posts.

This holster can be configured to your carrying preference using just a flathead screwdriver to swap parts.

Style & Color   Stock  
Black Holster   1  
Mahogany Holster   1  
 

Deluxe Belt Holster for iTaste VTR (E404) - $59.95
Deluxe hand-stitched leather holster for your iTaste VTR, in basic black with black stitching. Holster features a snap-close safety strap, sewn to the front to avoid any metal-on-metal contact with your iTaste, as well as a 7/8 inch wide metal spring clip so that you can attach it to your belt or pants.

(You can see what the back of this style of holster looks like in this photo.)

 

Deluxe Belt Holster for iTaste VTR (E405) - $59.95
Deluxe hand-stitched leather holster for your iTaste VTR, in two-tone mahogany with brown stitching and black edge detailing. Holster features a snap-close safety strap, sewn to the front to avoid any metal-on-metal contact with your iTaste, as well as a 7/8 inch wide metal spring clip so that you can attach it to your belt or pants.

(You can see the back of the holster in this photo.)

 

Mod Sleeve for Silver Bullet - $34.95
Snug fitting, hand-stitched leather mod sleeve to protect and decorate your Silver Bullet, in your choice of black with black stitching, or mahogany with tan stitching and black edge detailing.

Style & Color   Stock  
Black Sleeve   1  
Mahogany Sleeve   1  
 

Flexi-Sleeve for Silver Bullet - $39.95
Snug fitting, hand-stitched leather flexi-sleeve to protect and decorate your Silver Bullet, in your choice of black with black stitching, or mahogany with tan stitching and black edge detailing.

Includes a 36 inch (total length) round nylon lanyard with J-clip so that you can wear it as a lanyard but you can also use a carabiner or one of my handy snap-on clips, above, to attach it to a belt, pants, bag, or whatever!

Style & Color   Stock  
Black Sleeve   1  
Mahogany Sleeve   1  
 

Mod Sleeve for Silver Bullet (With Kick Extension) (SG-P429) - $34.95
Snug fitting, hand-stitched, leather mod sleeve to protect and decorate your mod, in black with black stitching.

 

Flexi-Sleeve for Silver Bullet (With Kick Extension) (SG-V438) - $39.95
Snug fitting, hand-stitched leather flexi-sleeve to protect and decorate your extended Silver Bullet, in black with black stitching.

Includes a 36 inch (total length) round nylon lanyard with J-clip so that you can wear it as a lanyard but you can also use a carabiner or one of my handy snap-on clips (above) to attach it to a belt, belt loop, bag, or whatever!

 

Embossed Flexi-Sleeve for Silver Bullet (SG-V442) - $49.95 $39.95
Snug fitting, hand-stitched leather flexi-sleeve to protect and decorate your Silver Bullet, embossed with a Celtic shamrock, in blarney green with olive stitching, a solid brass D-ring, and a glossy finish.

Includes a 36 inch (total length) round nylon lanyard with J-clip so that you can wear it as a lanyard but you can also use a carabiner or one of my handy snap-on clips (above) to attach it to a belt, belt loop, bag, or whatever!

 

Mod Sleeve for VAMO - $34.95
Snug fitting, hand-stitched leather mod sleeve to protect and decorate your VAMO, in black with black stitching. Choose from "tall" configuration (18650/dual 18350 - 22mm x 135mm) or "short" configuration (single 18350 - 22mm x 114mm).

Style & Color   Stock  
Black Sleeve, Tall   2  
Black Sleeve, Short   2  
 

Flexi-Sleeve for VAMO - $39.95
Snug fitting, hand-stitched leather flexi-sleeve to protect and decorate your VAMO, in black with black stitching. Choose from "tall" configuration (18650/dual 18350 - 22mm x 135mm) or "short" configuration (single 18350 - 22mm x 114mm).

Includes a 36 inch (total length) round nylon lanyard with J-clip so that you can wear it as a lanyard but you can also use a carabiner or one of my handy snap-on clips, above, to attach it to a belt, belt loop, bag, or whatever!

Style & Color   Stock  
Black Flexi-Sleeve, Tall   1  
Black Flexi-Sleeve, Short   1  
 

Mod Sleeve for VAMO (Tall Configuration) (SG-V405) - $34.95 $29.95
Snug fitting, hand-stitched, leather mod sleeve to protect and decorate your mod, in mahogany with golden tan stitching and black edge detailing.

This sleeve fits the VAMO in tall configuration (18650/Dual 18350 - 22mm x 135mm).

 

Mod Sleeve for VAMO (Short Configuration) (SG-P432) - $34.95 $29.95
Snug fitting, hand-stitched, leather mod sleeve to protect and decorate your mod, in mahogany with tan stitching and black edge detailing. This sleeve fits the VAMO in short configuration (Single 18350 - 22mm x 114mm).

 

Embossed Mod Sleeve for VAMO (Short Configuration) (SG-X333) - $59.95 $44.95
Snug fitting mod sleeve to protect and decorate your VAMO, in black with hand-colored embossed flame pattern at the botom edge, black stitching, and glossy finish. Features a large cutout so that you can view the LCD display without removing the device from the sleeve.

This sleeve fits the VAMO in short configuration (Single 18350 - 22mm x 114mm).

 


 
Updated April 24, 2014
©2011 Black Magik Enterprises